Welcome to Flux Australia!

Beambox | The Smart Desktop Laser Cutter & Engraver

The Smart Desktop
Laser Cutter & Engraver
Made for Creativity - Special Offer starting at $4650

Free your inner artist and bring your ideas to life

Beambox is a powerful laser cutter and engraver that lets you shape, cut, and engrave on materials like wood, leather, acrylic, and cardboard. Beambox meets all your expectations, and goes way beyond.

Friendly Software For All
Beam Studio is the highly integrated software compatible with Windows, macOS and Linux, its intuitive user interface allows you to easily access all features of Beambox.
Beam Studio enables multi-computer control and supports JPG / PNG / SVG / DXF files.
Beam Studio
Intuitive and Ready To Use
Control and monitor your Beambox at your fingertips with the touch panel. Make sure your design is perfectly aligned using the built-in camera to preview the work area. Compact water cooling system takes simplicity to a whole new level.
What You See Is What You Get
The built-in camera allows you to preview your design and the work area to make sure everything is perfectly aligned.
We Make It Easy
Design with software
Work on your design using softwares you’re familiar with, or just simply import JPG, PNG, SVG files to Beam Studio.
Edit with Beam Studio
Edit your files, set up cut/engrave layers, adjust laser power and speed in Beam Studio.
Start with Beambox
Preview the work area to see what the task will look like. Press Start and Beambox will bring your ideas to life.
Cut  Pro version Engrave
Wood 5 mm 8 mm
Acrylic 5 mm 8 mm
Leather 6 mm 8 mm
Cardboard 7 mm 10 mm
Felt 10 mm 12 mm
Rubbber 5 mm 8 mm
Paper 5 mm 8 mm
Anodized Aluminum
Stainless Steel*
* With FLUX Stainless Steel Spray
Maximum thickness 12mm (varies by material)
Dimensions 25 x 83 x 67 cm
Weight 40 kg
Work Area 40 x 37.5 cm
Camera Preview Area 40 x 36 cm
Work Area Depth 8 cm
Power AC 230V
Touch Panel 1024 x 600 LCD
Camera HD CMOS
I/O Wi-Fi / Ethernet
Spec 40 W  CO 2 Laser
Wavelength 10640 nm
Moving Speed 0 ~ 300 mm/s
Cutting Thickness 0 - 10 mm (varies by material)
Mode Vector / Graphic (monochrome, gray scale)
Operating System Windows / macOSX / Linux
File Type JPG / PNG / SVG / DXF
Dimensions 25 x 103 x 67 cm
Weight 48 kg
Work Area 60 x 37.5 cm
Camera Preview Area 60 x 36 cm
Work Area Depth 8 cm
Power AC 230V
Touch Panel 1024 x 600 LCD
Camera HD CMOS
I/O Wi-Fi / Ethernet
Spec 50 W  CO 2 Laser
Wavelength 10640 nm
Moving Speed 0 ~ 300 mm/s
Cutting Thickness 0 - 12 mm (varies by material)
Mode Vector / Graphic (monochrome, gray scale)
Operating System Windows / macOSX / Linux
File Type JPG / PNG / SVG / DXF
best affordable laser cutter beambox
Frequently Asked Questions
    • Beambox is the smartest desktop laser cutter & engraver made for your ideas. Equipped with the powerful CO2 laser, Beambox can cut and engrave on organic materials and even engrave on selected metal. With its revolutionary design and intuitive user interface, you’re just steps away from the fun of making amazing things.
    • The biggest difference is the laser. Beambox uses a 40-watt laser and can cut up to 10mm, while Beambox Pro uses a 50-watt laser and cuts up to 12mm. The size of Beambox Pro is relatively bigger.
    • Beambox supports files that you’re familiar with, such as JPG, PNG, SVG and DXF, and our software is very easy to use, with the tutorial provided, you will be making things in no time!
    • You can easily find answers to the most common questions on our Help Center, which we update regularly. You can also contact our customer support online and our support team will be more than happy to help you.
    • We provide a 12 month warranty for Beambox, and 3 month for the laser tube. If you’ve encountered an issue, please contact our technical staff, and our staff will determine the suitable fix. Parts and tutorials will be provided if needed, shipping will be charged.
    • To find out about shipping, go to your shopping cart and select your country from the drop-down list.
    • The recipient of an international shipment may be subject to import taxes, customs duties and fees which are levied once a shipment reaches the recipient's country. Additional charges for customs clearance must be fulfilled by the recipient. Customs clearance procedures may cause delays beyond our original delivery estimates.
    • Beambox is equipped with a CO2 laser tube operating at 10,640 nm averages 40W for Compact, and 50W for the Pro.
    • BeamBox can cut and engrave on wood, leather, cardboard, acrylic, rubber, foods and more, the maximum cutting thickness is 10mm (varies by materials) for Compact. The Pro model can cut up to 12mm (varies by materials). Beambox can also engrave on anodized aluminum and stainless steel, but the power levels are not enough to cut.
    • In fact, you can. The maximum cutting thickness stated in the specs are referred to a single cut with an average speed. If you slow down the speed or re-do the cut, you can cut deeper. For example, the maximum cutting thickness for acrylic is 5mm, you can cut 10mm or deeper if you slow down the speed or re-cut several times.
    • Almost, the camera will miss the upper margin by 1cm. Please see the specs for the dimensions.
    • Beambox is designed with various safety measures, such as smart lid detection and emergency power switch. Nevertheless, it is required that you never leave Beambox unattended while operating.
    • The power levels are not enough to cut, but it can etch on anodized aluminum and stainless steel with the use of our specialized coating.
    • You can engrave on stainless steel with Beambox only when it is coated with our specialized coating. Before you start, cover the material first with the coating for lasting results.
    • Beambox is equipped with an air pump and a powerful exhaust. The air pump prevents the material from catching fire while the exhaust extracts smoke and fumes.
    • The work area is 15.7” x 14.7” x 3.1“ (40 x 37.5 x 8 cm) / 23.6” x 14.7” x 3.1 (60 x 37.5 x 8 cm) There’s a honeycomb structure tray for materials that are up to 3 cm (1.18”) thick. The tray can be adjusted manually or removed to accommodate materials up to 8 cm (3.15”) thick.
    • The laser creates smoke and fumes when operating, we advise you pick a well-ventilated location and use the included exhaust hose for outdoor venting.
    • To ensure the quality of the laser engraving or cutting, you should check and clean the lenses and mirrors regularly. Usually once every week, but it depends on your usage and frequency.. Lubricate the rails and check the water level of the cooling tank regularly.
    • For general usage, the laser tube lasts 6 months to 1 year, The lenses and mirrors lasts 1 year or more under regular maintenance. If replacement is necessary, you can refer to our tutorial to change the parts on your own. We’re still working on the pricing and we will update them as soon as possible.
    • Yes, it is totally free. You’re more than welcome to download it even before receiving your Beambox. We’d love to hear your feedback!
    • Beam Studio is compatible with JPG, PNG, SVG, and DXF.
    • You can start, pause and stop task, control, and monitor the status of your Beambox all with a touch of the finger with the touch panel.
    • If you import the files to Beam Studio first, the files will be uploaded to Beambox before starting the task, so you can disconnect your computer from Beambox anytime. You can also import the files to Beambox directly using USB or choose from the recent task list on the touch panel.
    • You can connect via Wi-Fi or Ethernet.
    • Beam Studio is compatible with Windows, macOS and Linux.